Browse all practice questions for the PE Civil Transportation Practice Exam. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

PE Civil Transportation Practice Exam course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • Where can you find regulatory type sign information, including designation and size?
  • What is the equation number for Free Flow Speed (FFS) - Basic Freeway found in the HCM?
  • How is average spot speed related to time mean speed?
  • What is the relationship between the deflection angle and the central angle?
  • If given pipe parameters and flow or velocity, what are you calculating?
  • During a Standard Penetration Test (SPT), unusually low blow counts in a medium-dense to dense sand foundation may indicate which of the following conditions?
  • According to AASHTO guidelines, sight distance along horizontal curves is detailed in which chapter?
  • Where can one find the hydraulic elements graph for circular pipes?
  • What does a direct runoff hydrograph result from?
  • What is the primary focus of Chapter 9 in the AASHTO Green Book?
  • What does the term 'flw' represent in the Free Flow Speed equation?
  • What is the distinction of gradually varied flow?
  • In the Law of Sines for a triangle, which statement is true?
  • What vehicle characteristics influenced the change in testing standards from NCHRP Report 350 to MASH?
  • According to AASHTO, what is the recommended K factor percentage for urban areas?
  • Which table in the AASHTO Green Book details stopping sight distance (SSD)?
  • High plasticity clay is classified as which type?
  • What is the breakpoint for multi-lane highways regarding passenger cars?
  • Which of the following is not a characteristic of uniform flow?
  • In which section of the AASHTO Green Book can you find information on decision sight distance (DSD)?
  • Where can you find intersection traffic movements and numbering schemes?
  • How does the specific gravity of solid change during the compaction process?
  • Which tables will you use to find storage length for the 85th percentile?
  • What is the effective width in relation to object width when determining sidewalk dimensions?
  • How should a bike lane be delineated from motor vehicle travel lanes?
  • What is the primary function of the K factor in traffic analysis?
  • For which testing method is boring typically not necessary?
  • What should be prioritized in the design of streets to comply with ADA standards?
  • In the context of traffic engineering, what does AASHTO stand for?
  • What is the advantage of using a Shelby tube?
  • What section in the AASHTO Green Book discusses information on the maximum recommended superelevation rates?
  • What equation provides information on crown or tangent runout, Lt?
  • In turbulent flow, which chart is utilized to determine the friction factor (f)?
  • Which of the following is an application for disturbed soil samples?
  • At stop-controlled intersections, how far from the edge of the major road's traveled way should the vertex of the departure sight triangle on the minor road be?
  • In which manual can the safety performance functions be found?
  • What does the term "superelevation" refer to in road design?
  • Which table in the MUTCD addresses the placement of warning signs?
  • High plasticity inorganic clay soil is commonly referred to as what?
  • What is the minimum visibility distance for a portable change message sign (PCMS)?
  • What two speed percentiles are considered the most important?
  • The process of altering the engineering properties of in situ or borrowed soil is referred to as what?
  • What is the maximum allowable running slope of a ramp in new construction?
  • Maximum relative gradient, delta, for tangent runout and superelevation runoff is found in which section?
  • What type of distress is commonly measured in rigid pavement assessments?
  • According to AASHTO, what is the assumed perception-reaction time for drivers?
  • In which book and chapter would you find information about urban street segments?
  • At what flow level does maximum flow in a circular pipe occur?
  • What aspect of transportation safety does the AASHTO Green Book primarily aim to enhance?
  • Which document covers grade separation for bridges and roadways?
  • Which type of signal operation involves a fixed cycle regardless of traffic?
  • What section and equation in the AASHTO Green Book discuss superelevation?
  • A partially saturated soil is also known as which of the following?
  • What is the typical startup lost time at an intersection?
  • What does effective green, g, represent in interrupted flow conditions?
  • What is the primary goal of a complete street?
  • What is the purpose of the Shelby tube in field compaction measurement?
  • What does crashworthiness refer to?
  • What is the main purpose of boring holes in geotechnical exploration?
  • What is the rule of thumb for minimum interchange spacing in rural areas?
  • Which method is commonly used to analyze soil grain size distribution?
  • What factor is crucial in determining the geometric design of transportation corridors?
  • For effective soil management, which clay behavior is preferred?
  • Why is the degree of saturation important in traffic flow analysis?
  • Which factor is NOT considered during subsurface exploration?
  • Which book provides guidelines on the conservation of momentum?
  • Where can you find the adjustment factors for saturation flow rate at signalized intersections?
  • Which soil type is most suitable for use as an embankment shell?
  • What is the typical width of a shared path?
  • Where can the predictive model equation be located?
  • Hydraulic Grade Line (HGL) adds which component to determine the Energy Grade Line?
  • How is the percentage of sand in a soil sample calculated?
  • The major loss of energy in long pipes is primarily due to what?
  • Which section in AASHTO Green Book provides guidelines for channelization?
  • How is pace defined in relation to speed?
  • Which of the following is not a type of traffic assignment?
  • Which sampler is best for obtaining undisturbed soil samples?
  • Where can you find information about braking/skidding distance?
  • Which equation discusses horizontal sight distance in relation to stopping sight distance on horizontal curves?
  • If given pipe parameters such as diameter, length, roughness, and pressure drop, what are you calculating?
  • What is the assumed height of an object above the pavement as per AASHTO?
  • Which structure allows passage of a highway under a railroad?
  • Which table in the AASHTO Green Book provides information on swept path widths for 90-degree left turns?
  • What term is used for the recommended lane width in a typical intersection scenario according to AASHTO?
  • What is defined as the capacity of an intersection approach?
  • What does the California Bearing Ratio (CBR) test measure?
  • Which characteristic is true for uniform flow?
  • What do intensity-duration-frequency curves primarily relate to?
  • How is the equation for saturation flow, s, expressed?
  • Where can you find information about auxiliary lanes at intersections according to AASHTO?
  • For temporary traffic control zone signs, which table in the MUTCD should be referred to?
  • Which chapter and table in the AASHTO Green Book provides details on vehicle sizes?
  • In AASHTO guidelines, what does the “SN” stand for?
  • What does Lr in relation to superelevation runoff refer to?
  • What is the section number for stopping sight distance in the AASHTO Green Book?
  • What type of movements does split phasing serve?
  • What were two reasons for the change of testing standards from NCHRP Report 350 to MASH?
  • Which of the following is true about ramp design in ADA compliance?
  • Where would you find the design chart for flexible pavements based on mean values?
  • What aspect does not form part of the types of sight distances in roadway design?
  • What is the maximum ratio allowable between a flatter radius and a sharper radius of compound curves?
  • What is the objective of using high visibility retro-reflective materials for signs?
  • What effect does a larger Manning "n" value have on water flow?
  • What is the term for the time required by a raindrop from the hydraulically most remote point to reach the outlet of a drainage basin?
  • What is the effective length for a sidewalk relative to the object's effective width?
  • What is the effect of increasing lane width on Free Flow Speed?
  • In the Free Flow Speed equation, what does TRD stand for?
  • What effect does compaction have on soil density?
  • What equation in the AASHTO Green Book provides information on SSD related to horizontal curves?
  • How is the central angle related to the deflection angle?
  • What type of pressure is referenced in closed conduit problems?
  • What is the primary use of the data collected during subsurface exploration?
  • In transportation engineering, which section in the AASHTO Green Book discusses median openings?
  • A low blow count during an SPT might suggest which of the following?
  • Which method or model in M-E PDG predicts rutting in flexible pavement design?
  • The process of dynamic compaction is primarily used to achieve __________ in granular soil?
  • What is defined as non-uniform flow?
  • In which manual can you find axle load equivalency factors for flexible pavement?
  • Which type of pavement is punchout distress primarily associated with?
  • Which publication provides information on stopping sight distance and passing sight distance?
  • In fluid mechanics, what does a larger Reynolds number typically indicate?
  • What is the correct order of the main steps in the Mechanistic-Empirical Pavement Design method?
  • Which of the following is NOT a method for calculating friction losses?
  • What type of sample is needed for consolidation testing of clay?
  • Where can you find the segment accident rate calculation?
  • Why is the driver's eye height for large trucks specifically cited in roadway design standards?
  • What characterizes uniform flow in a fluid?
  • According to AASHTO guidelines, which tables are referenced for determining when a left turn (bay) lane is warranted?
  • What is the minimum ratio of letter height to legibility distance for signs?
  • In which manual can the intersection accident rate, R, be found?
  • Can an undisturbed soil sample be used to find the strength of soil?
  • Which book and table should be referenced for the advance placement of warning signs?
  • Which guide describes the method for determining axle load equivalency factors?
  • Which factor influences the friction factor?
  • Which guide provides instructions on calculating the structural number (SN)?
  • Which table in the MUTCD is associated with warning type signs?
  • Which term is utilized to describe the distance a driver needs to recognize a potential hazard?
  • Which type of roundabout is noted for giving the best performance according to traffic engineering standards?
  • What is the standard reference for speed percentiles and speed limits?
  • Where can you find in situ tests for subsurface investigations?
  • The Froude number is used to determine the classification of what?
  • Which type of soil is typically worst at handling frost heave?
  • What is the significance of the traffic signal cycle length?
  • What is the formula for calculating effective rainfall?
  • What do you calculate when provided with flow rate or velocity and pressure drop?
  • What is one of the benefits of designing complete streets?
  • What is the minimum width of a bike lane for a road with curb and gutter?
  • Which book provides the required structural number (SN)?
  • Which document contains channelizing device spacing regulations?
  • What is the minimum letter height on a portable change message sign (PCMS)?
  • What type of road conditions does the AASHTO Green Book mostly address in terms of visibility?
  • At what speed is it generally impractical to design a compound curve?
  • What is the preferred cycle length option to promote a feeling of movement for drivers?
  • What is the main feature of rapidly varied flow?
  • Which flow condition leads to a consistent flow path with streamlined motion?
  • In steady flow, which of the following characteristics remains constant over time?
  • Which book discusses access control in detail?
  • What assumption does NCEES make regarding the nature of n when not stated?
  • According to AASHTO guidelines, what section provides information on islands?
  • In the context of culvert design, what does higher friction loss imply?
  • To find storage lengths for the 50th percentile in traffic engineering, which table would you refer to in the AASHTO Green Book?
  • What does the equation for Design Hourly Volume (DHV) include?
  • Which section of the AASHTO Green Book provides information on passing sight distance (PSD)?
  • What are the four primary steps involved in transportation modeling?
  • What does an increase in the headwater depth indicate in culvert operations?
  • In which document can you find information on warranting traffic signals?
  • The Reynolds number is primarily used to classify which types of flow?
  • In roadway design, what do vertical clearance calculations help ascertain?
  • In which book can you find information regarding pedestrian off-street facilities?
  • Which AASHTO guide and table specifies when a median barrier is required?
  • What section in the AASHTO Green Book addresses spiral curves?
  • In the context of fluid mechanics, what defines steady flow?
  • What is the primary focus of the Mechanistic-Empirical Pavement Design method?
  • What is meant by 'lost time' in traffic signal operations?
  • Where can you find the capacity of base (perfect) conditions for traffic?
  • What is the default speed for a walking pedestrian in feet per second?
  • What factors does the coefficient of permeability (k) depend on?
  • Where can effective widths for sidewalks be found?
  • How does time mean speed differ from space mean speed?
  • What factors influence the volume of runoff in a drainage area?
  • According to Darcy's Law, how is discharge velocity related to the hydraulic gradient in saturated soils?
  • What does R2 in median design represent?
  • Which chapter contains information on intersection geometry in the AASHTO Green Book?
  • When are oversized signs typically used?
  • Where can different traffic conditions for road widening be found?
  • In traffic studies, what does the variable 'D' typically represent?
  • Which of the following is a typical walking speed of a pedestrian in feet per minute?
  • According to guidelines, how high above the pavement is the driver's eye for large trucks assumed to be?
  • In a standard proctor test, what is the mold volume?
  • Which method is least effective in addressing postconstruction settlement of highly compressible clay soils?
  • What safety-related aspect does the AASHTO Safety Manual primarily focus on?
  • Which level offers the most accuracy and least uncertainty in geotechnical mechanical property inputs using the Mechanistic-Empirical Method?
  • The empirical method or model described in M-E PDG is specifically referred to as which model?
  • What aspect does level of service (LOS) assess in traffic conditions?
  • The Mechanistic-Empirical Pavement Design approach relies on which key input?
  • What is the average speed of a pedestrian?
  • Where can one find the probability of storm frequency in reference materials?
  • A negative gauge pressure in fluid indicates what?
  • Dynamic compaction is primarily effective for densifying which type of soil deposits?
  • What does split phasing refer to in traffic control?
  • Where can you find drainage coefficients and moisture exposure percentages for pavement structures?
  • Where would you typically find Manning's equation referenced?
  • Disturbed soil samples can be used for which of the following analyses?
  • Which table in the AASHTO Green Book contains information about roundabouts?
  • When using a Sheep's foot roller on clay soil, which parameter decreases?
  • When designing roadside safety, what is often prioritized over standard aesthetics?
  • Which of the following is a requirement for road signs?
  • What equation is used to calculate the intersection accident rate, R?
  • Where can you find information regarding sight distance for railroad crossings?
  • What is the significance of measuring passenger cars (pc) in traffic analysis?
  • Which chapter of the AASHTO guide discusses superelevation?
  • What is the defining aspect of subcritical flow?
  • Which soil grouping is least likely to present embankment and settlement problems?
  • What does the saturation flow rate represent?
  • What practical application is associated with knowing the drainage coefficients in pavement design?
  • Which of the following factors influence the free-flow speed of a basic freeway segment?
  • In which exhibit can you find typical cycle lengths?
  • In soil mechanics, what does the term 'consistency limits' refer to?
  • Where can you find the equation for shift taper lengths in traffic engineering?
  • Where would you find information on pedestrian service time?
  • What is the definition of speed in transportation terms?
  • What is the primary reference to find pedestrian Level of Service (LOS) score?
  • Which type of cracking is primarily influenced by repeated loading and stress concentration?
  • Which book includes the segment accident rate, R?
  • For minimum turning paths, which figures in the AASHTO Green Book should be referenced?
  • What is the assumed height of a driver's eye above the pavement?
  • What is the minimum cross slope allowed for ramps?
  • As the duration of a storm increases, what happens to rainfall intensity?
  • What is the recommended minimum interchange spacing in urban areas?
  • What does DHV stand for in traffic analysis?
  • During pavement evaluation, what does skid resistance indicate?
  • What is the maximum depth of water allowed in a clear zone?
  • What does BFFS stand for in transportation metrics?
  • Which statement is true regarding flow in a circular sewer when n is constant with depth?
  • Which parameter is NOT typically included in the head loss calculations?
  • What does the Directional Design Hour Volume (DDHV) equation calculate?
  • A culvert that lowers a channel conveyance typically results in which outcome?
  • How many hours need to be sought on a K-Value vs. AADT graph?
  • Which of the following can Manning's equation be used to calculate in open channel flow?
  • What does capacity measure in traffic engineering?
  • Which book provides information on traffic signal operations?
  • Minimum green time for pedestrian signals is influenced by what factor?
  • What does K factor represent in traffic volume studies?
  • In terms of roadside safety, what does the term 'fixed objects' refer to?
  • In which test is a hammer adjusted to 10 and 18 lbs for measurement?
  • Which table in the AASHTO Green Book provides desirable lane change and deceleration distances for auxiliary lanes?
  • What approach does the Performance Prediction Model in M-E PDG use to predict distress parameters?
  • When calculating vertical clearance, which points are crucial to consider?
  • What does the dynamic cone penetrometer (DCP) test determine?
  • If the Froude number is greater than 1, what type of flow is present?
  • What is the assumed deceleration rate according to the AASHTO Green Book?
  • What is the maximum capacity of a sidewalk in pedestrians per minute per foot?
  • What defines an undercrossing in transportation infrastructure?
  • What is the function of an overhead in transportation contexts?
  • What does an increase in the degree of saturation indicate in the context of soil compaction?
  • How frequently do high-intensity storms occur?
  • What characteristics are used to evaluate whether a pavement should be rehabilitated?
  • Which section addresses maximum recommended superelevation rates in the AASHTO Green Book?
  • Which AASHTO guide section provides information on clear zones?
  • What are the four temporary traffic control zones?
  • What is a benefit of roundabout design compared to traditional intersections?
  • Which criteria must be met for sign placement according to MUTCD?
  • What is the recommended formula for the nose radius R2 for a median opening?
  • What is saturation flow?
  • What type of soil sample is typically used for grain-size analysis and specific gravity determination?
  • Where can one find post spacing guidelines?
  • What equation is used to determine the percentage of gravel in a soil sample?
  • For horizontal sight offset (HSO), the radius R is measured from which point?
  • Transportation modeling primarily consists of how many steps?
  • Where would you find information regarding roundabouts in the context of traffic engineering?
  • What is the primary purpose of a clear zone?
  • Where can you find expectations for compound curves?
  • Under what conditions should the platoon adjusted condition for walkways be used?
  • What equation is used to find the superelevation runoff length, Lr?
  • The Energy Grade Line (EGL) is equivalent to which of the following?
  • What is the correct sequence of sight distances starting from the least critical?
  • If the flow in the culvert is critical, what can be inferred about the Froude number?
  • What does the volume-to-capacity ratio indicate in traffic engineering?
  • What flow situation is characterized by consistent flow parameters at a specific section with no variations over time?
  • What is required for sign legibility according to the standards?
  • What term refers to losses that occur due to fittings, bends, and other components in a pipeline?
  • Low plasticity clay (CL) is commonly referred to as?
  • A fully saturated soil is best described as which phase system?
  • The Darcy-Weisbach Equation primarily relates to which aspect of fluid flow?
  • What is the recommended action when there is too much dynamic deflection between railing and posts?
  • What does the term 'lost time' refer to in traffic signal management?
  • Where do you find spacing for chevron or curve signs?
  • Where can information on crest vertical curves be found?
  • What is described as unsteady flow?
  • What is the degree of saturation when the void space in a soil sample consists of 0% air and 100% water?
  • What information is essential for soil type classification?
  • When calculating friction loss for laminar flow, which formula should be used?
  • Which AASHTO Green Book table includes information about stopping sight distance?
  • What is the maximum rise for a ramp run in inches?
  • What is described as an overcrossing in transportation infrastructure?
  • What is the primary use of the 85th percentile speed?
  • What statistical measure is used to represent the speeds of the observed data set?
  • How can the rainfall at any place be described?
  • How is the term 'pavement structure' primarily defined in the context of highway engineering?
  • Which sight distance is specifically related to the distance needed to stop a vehicle safely?
  • What does a higher coefficient in Manning's equation indicate?
  • The pavement response model in M-E PDG employs which method to calculate stress and strain parameters?
  • What is the maximum slope for recoverable fore-slopes according to standards?
  • What is the primary measurement obtained from the Standard Penetration Test (SPT)?
  • Which method is best suited for obtaining an undisturbed clay sample?
  • Which tables in the AASHTO Green Book are used to determine widening on horizontal curves?
  • What is the term used to describe the depth of uniform flow?
  • Which soils are best at handling frost heave?
  • What does the friction slope represent in fluid mechanics?
  • The larger the roughness coefficient of the Manning "n" value indicates what about the flow velocity?
  • What is hydraulic radius equal to?
  • What is the primary reason for providing a recovery area near roadways?
  • The postconstruction settlement of compressible clayey soil can be achieved by which method?
  • What does head loss equal to?
  • How many types of sight distances are recognized in roadway design?
  • What is the primary function of the Highway Capacity Manual?
  • What is the maximum cross slope allowed for ramps?
  • Which of the following parameters is not required in the Rational method to calculate the peak flow?
  • What factor determines if the flow is turbulent or laminar?
  • In highway design, what type of distance is associated with a safe transition during overtaking maneuvers?
  • What is the submerged (buoyant) unit weight of soil?
  • The Kn factor in the Uniform Flow Section Factor is what value?
  • What types of losses are included in the head loss calculation for a culvert?
  • At which type of location is platoon adjusted condition most commonly applied?
  • What is the typical use for the Manning’s n value in engineering?
  • What is the degree of saturation, X?
  • What does saturation flow rate take into account?
  • How many psi is equivalent to 1 ft. of H2O?
  • In which publication is rigid pavement design presented?
  • What is indicated by a high degree of saturation in soil?
  • What is the standard atmospheric pressure at sea level?
  • What does Free Flow Speed (FFS) indicate?
  • What page in AASHTO 1993 contains information about the structural number, SN?
  • Which book provides guidelines for the proper specifications of traffic control devices?
  • Which publication provides the cumulative growth factor and its equation?
  • What is a Shelby tube used for?
  • Which type of signal operation is activated by detected vehicles on a side road?
  • Which factor is considered in calculating the saturation flow rate?
  • Which roundabout configuration is noted for giving the worst performance?
  • Can a disturbed soil sample be used to find the strength of soil?
  • Which type of traffic assignment is characterized by the distribution of trips throughout a network based on travel time?
  • Which equation describes the platoon ratio, Rp?
  • What book is recommended for information on channelization in transportation engineering?
  • What is the maximum allowable cross slope for ADA compliant ramps?
  • What does the 50th percentile speed represent?
  • How is the term 'capacity' distinguished from 'saturation flow rate'?
  • What instruments can be used to measure field compaction?
  • What is a typical feature of a median according to AASHTO standards?
  • Which of the following types of operations adjusts signal timing based on real-time traffic conditions?
  • Which factors influence soil settlement and embankment problems the most?
  • What is the focus of Sec. 3.3.8.2.1 in the AASHTO Green Book?
  • What equation provides information on crash (accident) modification factors?
  • When applying the Mechanistic-Empirical Pavement Design process, which of the following is established first?
  • Subsurface exploration is necessary for which of the following purposes?
  • What factor does NOT contribute to the condition evaluation of pavements for rehabilitation?
  • What is the minimum width of a bike lane for a road without curb and gutter?
  • What defines the effective unit weight of a soil?
  • Which book contains information on superelevation and ramps?
  • In what scenario should regulatory signs be used?
  • What impact does an effective green time have on traffic flow?
  • Where can the installation height and lateral offsets for signs be found?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy